Model Number: ZYB-60/ CF13009-A
Brand Name: Galaxy / Yinhe
Key Specifications/Special Features:
ZYB-60 Oil PumpZYB series oil pump is used for pumping light oils such as diesel or kerosene for vehicles, construction sites, farms and outside applications or other for other fuel powered equipmentThis series oil pump uses an electric motor, vane oil pump, flow meter and a computation meter
It is convenient, reliable, easy to operate and simple to maintain
It displays the amount of fuel pumped per job and has a total lifespan of service count
The manual wheel is used to zero out each pumping job
Remark: this oil pump is intended for non-commercial use.
Product specifications:
- Model: ZYB-60
- Pumpflowrate: (20-60)L/min
- Meterflowrate: (20-120)L/min
-
Voltage:
- AC 220V±10%
- 50Hz/60Hz
- AC 110V±10%, 60Hz
- Maximum working pressure: 3bar
- Meter accurancy: ±1%
- Motor parameter power:
- Power:0.375kW
- Turning speed:2800rpm
-
In-out:
- In: BSPl"
- Out: BSPl"
- Digit: 4 digits, maximum 9999.9 liters, 8 digits accumulated
-
Environment condition:
- Temperature: -25-55℃
- Relative humidity: 30-90%
- High atmospheric pressure: 86-1 06kPa
Common Troubleshooting |
Fault Appearance |
Main Reason |
Fault Resolution |
|
1. The power cable is not plugged in 2. The motor has jammed 3. Capacitor failure |
1. Check theelectric cable |
2. Replace the motor |
3. Replace capacitors |
- Motor turns but no oil output
|
1. Suction side not submerged in oil 2. Vanes worn or gear damaged |
1. Check the oil suction hose/pipe |
2. Replace vanes or gear |
- Abnormal metering or no meter output
|
1.Computation swing tray has broken |
1.Replace the copulation swing tray |
Little oil-output |
1.Plugged strainer |
1.Clean strainer |